wearfauna.com
Quick User Guide
Welcome to Fauna – your audio glasses!
Download the “Fauna“ app now.
Fauna overview
USB-C
CONNECTION
CHARGING
CONTACTS
CHARGING
CONTACTS
4 LEDS:
CASE STATUS
1 LED:
GLASSES STATUS
TOUCH CONTROL
LEFT TEMPLE
WOOFER
USOUND MEMS
SPEAKER
TOUCH CONTROL
RIGHT TEMPLE
2 MICROPHONES
USOUND MEMS
SPEAKER
CHARGING
CONTACTS
WOOFER
First steps
Using Fauna
L E F T
T E M P L E
R I G H T
T E M P L E
Tap & hold
Force pairing
Slide back
Volume up
Slide forward
Volume down
Tap & hold
Decline call
Skip to next song
For more control
options, download
the “Fauna“ app.
Double tap
Active voice
assistant
Double tap
Accept call
End call
Play music
Pause music
Important information
The pairing with a device can be forced:
tap and hold on the right temple, then
connect the output device to Fauna via
Bluetooth.
Fauna is only splash-proof. Please do not
keep it under running water.
Adjustments of frame, length of the temple
and lenses can be made by an optician.
Please leave this to a professional.
Fauna can only be recharged in the case.
Please do not charge any other way.
Charging the glasses
The “glasses status“ LED in the Fauna
case indicates the status of the glasses.
This LED flashes yellow (low charge
level) or green (charge level above 30 %)
if the contacts are connected properly.
At 100 % charge, the LED glows green
for 10 seconds after opening the case.
Charging the case
The 4 LEDs on the outside show the
battery status of the Fauna case. When
the case is charged via USB-C cable,
they will flash. If they glow continuously,
the Fauna case is completely charged.
More about your Fauna
Find more information and a detailed
manual in different languages at:
www.wearfauna.com/manual
LED
glasses status
less than 100 %:
flashes green
less than 25 %
100 % charged
less than 75 %
less than 50 %
LED
case status
less than 30 %:
flashes yellow
100 % charged:
lights up green 10 sec.
Instructions for opticians
Cut off the description and take it with you to the glasses
adjustment. Fauna is suitable for prescription lenses.
Attention:
Fauna contains electronics.
Please follow these
instructions to avoid
any damage.
Activate
Prior to first use, peel the plastic
protector off the charging contacts
and place the glasses back in the case.
Once the contacts are successfully
connected, the LED “glasses status”
will light up. Close the case and reopen
it. Fauna has now been activated and
you will hear: “Hi! Fauna is on”.
Once
activated, Fauna is always ready to use.
Connect
Place the glasses in the case and
close the lid. Open the lid again, acti-
vate Bluetooth on your mobile device
and search for Fauna. The connection
is confirmed with “Great, Fauna is
connected.” If you hear “Please try
pairing again,” repeat the procedure.
With known devices, Fauna connects
automatically.
Charge
If the battery charge is below 30 %, Fauna warns
you: “Battery low, please charge your Fauna”. To
charge your Fauna, put it in the case making sure
that the pins are connected. Close the lid to start
the charging process. To indicate your Fauna is
connected correctly, after closing the case, the
left-most and right-most of the 4 “case status”
LEDs will light up for 5 seconds. The Fauna case
serves as charging station.
