manualshive.com logo in svg

Faun C40 Trackway, Руководство пользователя

Поделиться
Скачать
Faun C40 Trackway Скачать руководство пользователя страница 29

29

5670480 (FTW-5670480 - 4.0) Boat Ramp Kit 

 

Copyright © FAUN Trackway Limited  

6. MAINTENANCE

2. Lift up the selloc pin and slide locking bolt backwards. Repeat this process with partner 
Locking Bolt and two adjacent Locking bolts to enable the panel to slide out. 

Fig 6-7 Lift up Selloc Pin 

3. Slide the panel out approximately 300mm to enable the Locking bolt to be removed. Flatten 
the Locking bolt with the selloc pin facing into the C40 / C90 Trackway

®

 and knock the selloc 

pin out.

Fig 6-8 Slide out panel approximately 300mm

Using a suitable punch and hammer, drive the selloc pin out completely and slide the Locking 
Bolt out from the panel. 

6.8  Replacement of Tamperproof Stainless Steel Locking Bolt (optional) 

1. (C40 Trackway

® 

only) Remove the Tamperproof Locking bolt by driving the selloc pin until 

the end is flush with the Locking bolt using a suitable punch and hammer. Repeat this process 
with partner Locking bolt and two adjacent Locking bolts to enable the panel to slide out. 

Locking bolt
5812854

Selloc Pin
5670715

Fig 6-5 Drive Selloc Pin until flush with Locking bolt

Fig 6-6 C90 Locking bolt with rubber grommet

Содержание C40 Trackway











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды