FatShark Scout HD FSV1126, Руководство пользователя

Страница: 5 / 9

Fat Shark 5
Operation
DC cable input: 3S
– 4S LiPo
The DC cable converts 9-18V input, fixed 7.8V output. We recommend a 3S
– 4S
battery.
After power on, the system will automatically enter sweep mode and sweep again at 8 -
second intervals until a valid channel is searched, then it will automatically enter video
mode and display images. If more than one channel is searched, all valid channels will
be listed in this, and the valid channels will be updated every 8 seconds.
If no valid channel has been searched, Long press the up button to force into video
mode. (At this time the image is displayed as a black screen, because there is no valid
channel)
In video mode, you can long press the up button to enter the menu interface. The menu
is used for system setting.
Long press the up button to switch between video mode and menu interface.
Firmware Update
We recommend using a standard Micro SD card with a capacity of 2GB - 32GB, which
is commonly available in the market
First, put the upgrade the firmware to the root directory of the Micro SD card
( HDZERO_RX.bin, Shark_Byte.bin, HDZERO_VA.bin, IPL, RTK)d. Then power on .
The system will automatically enter firmware update mode, please do not power off
during the upgrade process. When the firmware update is finished, The system will
prompt for a reboot, then the upgrade will be successful.
.