Functional Description
VIM301
V I M 3 0 1 U s e r M a n u a l
18
© 2 0 1 5 F a s t w e l v . 0 0 2
3.2.4
PCI Configuration and Video Mode Selector
PCI configuration and video mode selector (SA2) is a 8-position DIP switch (Tyco Electronics
GDH08STR). Switching is allowed only when the power is off. The SA2 settings are described in
the table below.
Table 3.2:
SA2 Settings
Switch Number,
Switch Position
Adjusted Parameters
1
2
PCI configuration (PC/104-
Plus
connector)
«0»
«0»
«1»
«1»
«0»
«1»
«0»
«1»
IDSEL0, INTA#, GNT0#, REQ0#, CLK0
IDSEL1, INTB#, GNT1#, REQ1#, CLK1
IDSEL2, INTC#, GNT2#, REQ2#, CLK2
IDSEL3, INTD#, GNT3#, REQ3#, CLK3
3
Flat Panel 2 and LVDS2: clock frequency type
«0»
«1»
No inversion
Inverted
4
Flat Panel 2: color depth
«0»
«1»
18-bit
24-bit
5
SGD and LVDS2 source signal selection
«0»
«1»
Flat Panel 2
Flat Panel 1
6
Planar display operation mode (for module version 2.0 and higher)
«0»
«1»
Monochrome mode
Shades of gray
7
Flat Panel 2 and LVDS2 operation mode
«0»
«1»
Graphics mode for DOS operating system
Graphics mode for other operating systems
8
Not used
«0»
«1»
Not used
Not used
In the table above: «0» corresponds to ON position; «1» corresponds to the opposite position
Figure 3.4:
SA2 DIP Switch
0
1
