CPC309 Intel Atom D510-based SBC
Specification
MANUFACTURER’S WARRANTY
Warranty Liabilities
The Manufacturer hereby guarantees the product conformity with the requirements of the
4013-
025-72782511-09
technical conditions provided that the Consumer complies with the operating,
storage, transportation and installation conditions and procedures, specified by the
accompanying documents.
The Manufacturer hereby guarantees that the products supplied thereby are free from defects in
workmanship and materials, provided operation and maintenance norms were observed during
the currently established warranty period. The Manufacturer's obligation under this warranty is
to repair or replace free of charge any defective electronic component being a part of a returned
product.
Products that broke down through the Manufacturer's fault during the warranty period will be
repaired free of charge. Otherwise the Consumer will be invoiced as per the current labor
remuneration rates and expendable materials cost
Liability Limitation Right
The Manufacturer shall not be liable for the damage inflicted to the Consumer's property
because of the product breakdown in the process of its utilization.
Warranty Period
The warranty period for the products made by Fastwel Group is 24 months since the sale date
(unless otherwise provided by the supply contract).
The warranty period for the custom-made products is 36 months since the sale date (unless
otherwise provided by the supply contract.
Limitation of warranty liabilities
The above warranty liabilities shall not be applied:
To the products (including software), which were repaired or were amended by the employees,
that do not represent the manufacturer. Exceptions are the cases where the customer has
made repairs or made amendments to the devices in the strict compliance with instructions,
preliminary agreed and approved by the manufacturer in writing;
To the products, broken down due to unacceptable polarity reversal (to the opposite sign) of the
power supply, improper operation, transportation, storage, installation, mounting or accident.
Returning a product for repair
1. Apply to Fastwel company or to any of the Fastwel's official representatives for the Product
Return Authorization.
2. Attach a failure inspection report with a product to be returned in the form, accepted by the
Manufacturer, with a description of the failure circumstances and symptoms.
3. Place the product in the consumer packaging (antistatic bag) and cardboard box, in which the
product had been supplied. Failure to package in antistatic material will VOID all warranties of
the Customer on a unilateral basis.
4. The customer pays for shipping the product to Fastwel or to an official Fastwel representative or
dealer