CPC309 Intel Atom D510-based SBC
Specification
TRANSPORTATION, UNPACKING AND STORAGE
Transportation
The device should be transported in original manufacturer’s separate packaging
(transport packaging), which contains an individual antistatic bag and a cardboard box, in the
closed transport (automobile, railway, air transportation in heated and pressurized
compartments) in storage conditions 5 defined in the IEC 721-2-1 standard (
GOST standard
15150-69
) or in storage conditions 3 during sea transportation.
The packaged modules should be transported in accordance with the shipping rules,
specified for this particular type of transport.
During handling and transportation operations, the packaged modules should not
undergo sharp pounding, falls, shocks and exposure to atmospheric precipitation. The goods
should be stored in a carrier vehicle in such a manner which will prevent their moving.
Unpacking
Prior to unpacking, after transportation at subzero temperature of ambient air the
module(s) should be kept within 6 hours under storage conditions 1 defined in the IEC 721-2-1
standard (
GOST standard 15150-69
).
It is prohibited to place the packaged module close to the heat source, prior to
unpacking.
Retain all original packaging at least until the warranty period is over. You may need it for
shipments or for storage of the product.
After unpacking the product, you should inspect it for visible damage that could have occurred
during shipping or unpacking. If damage is observed (usually in the form of bent component leads or
loose socketed components), contact Fastwel's official distributor from which you have purchased the
product for additional instructions
.
Storage
Module storage conditions for group 1 are defined in the IEC 721-2-1 standard (
GOST standard
15150-69
).