manualshive.com logo in svg

Fastwel CPC309, Руководство пользователя, Страница: 6 / 70

Поделиться
Скачать
Fastwel CPC309 Скачать руководство пользователя страница 6

CPC309 Intel Atom D510-based SBC

          

 

Specification 

 

List of figures 

Fig. 1-1: Template for ordering CPC309 CPU Module ......................................................................................... 11 
Fig. 2-1: Dimensions and fitting dimensions of the module (top view) 

….............................................................. 15 

Fig. 2-2: Module dimensions (side view) 

……....................................................................................................... 16 

Fig. 3-1: Module block diagram 

…............................................................................................................................17 

Fig. 3-2: Location of connectors and major components on the TOP side.. .......................................................... 19 
Fig. 3-3: Location of connectors and major components on the BOTTOM side..................................................... 19 
Fig. 3-4: StackPC (XP7) connector.......................................................................................................................... 22 
Fig. 3-5: PCI-104 (XS4) 

connector’s contacts......................................................................................................... 25 

Fig. 3-6: VGA CRT (XP1) connector........................................................................................................................ 25 
Fig. 3-7: LVDS (XP8) connector............................................................................................................................... 26 
Fig. 3-8: XP19 Audio connector............................................................................................................................... 27 
Fig. 3-9: XP 20 Audio connector.............................................................................................................................. 27 
Fig. 3-

10: COM1/COM2 (XP3 и XP6) connectors.................................................................................................... 29 

Fig. 3-11: USB1-USB2 (XP5) connector.................................................................................................................. 29 
Fig. 3-12: CompactFlash XP12 connector............................................................................................................... 30 
Fig. 3-13: PS/2 (XP15) connector............................................................................................................................ 32 
Fig. 3-14: XP25 power supply connector................................................................................................................. 33 
Fig. 3-15: Connector of XP24 digital I/O port

……………......................................................................................... 34 

Fig.3-16: Reset XP16 connector.............................................................................................................................. 35 
Fig. 4-1: Heat removal methods ................................................................................................................................39 
Fig. 5-1: Status of the PCI VIO Selector (XP13) Switch Contacts 

…...................................................................... 43 

Fig. 5-2: TFT (XP2) Digital Panel Power Switch ..

……………................................................................................. 44 

Fig. 7-1: Screen during module loading (POST)

…………….................................................................................... 49 

Fig. 7-2: "Main" Tab Menu Screen

…………............................................................................................................. 50 

Fig. 7-

3: “IDE Primary/Master” submenu screen ……………................................................................................... 51 

Fig. 7-4: "Memory Cache" submenu screen

………….............................................................................................. 52 

Fig. 7-5: "Boot Features" submenu screen

…………................................................................................................ 53 

Fig. 7-6: Advanced tab menu 

screen……………........................................................................................................54 

Fig. 7-7: "PnP Configuration" submenu screen

…………......................................................................................... 55 

Fig. 7-8: " Console Redirection " submenu screen

………….................................................................................... 56 

Fig. 7-9: "I/O Device Configuration" submenu screen

……………............................................................................ 57 

Fig. 7-10: "Intel" Tab Menu Screen

…………............................................................................................................ 58 

Fig. 7-11: "CPU Control Sub-Menu" submenu screen

…………............................................................................... 59 

Fig. 7-12: "Video (Intel IGD) Control Sub-Menu" submenu screen

…………............................................................ 60 

Fig. 7-

13: “IGD – LCD Control Sub-Menu” submenu screen.................................................................................... 61 

Fig. 7-14: "ICH Control SUB-Menu" submenu screen 

….......................................................................................... 62 

Fig. 7- 

15: “PCI Express Control SUB-Menu” submenu screen ............................................................................... 63 

Fig. 7-16: ICH USB Control Sub-Menu 

screen……………. ….................................................................................. 64 

Fig. 7-17: Security tab menu 

screen……………........................................................................................................ 65 

Fig. 7-18: "Boot" Tab Menu Screen 

………..……........................................................................................................66 

Fig. 7-19: "Custom" Tab Menu Screen

………........................................................................................................... 67 

Fig. 7-20: "Exit" Tab Menu Screen

………................................................................................................................. 68 

Fig. A-1: Heat-sink temperature dependency from the ambient temperature when using a radiator (ACS00035-01 
kit)

….……………………………………………………………………………………...................................................... 69

 

 

All information in this document is provided for reference only, with no warranty of its suitability for any specific purpose. This information 

has been thoroughly checked and is believed to be entirely reliable and consistent with the product that it describes. However, Fastwel accepts no 
responsibility for inaccuracies, omissions or their consequences, as well as liability arising from the use or application of any product or example 
described in this document.  
Fastwel Co. Ltd. reserves the right to change, modify, and improve this document or the products described in it, at Fastwel's discretion without further 
notice. Software described in this document is provided on an “as is” basis without warranty. Fastwel assumes no liability for consequential or 
incidental damages originated by the use of this software.  

This document contains information, which is property of Fastwel Co. Ltd. It is not allowed to reproduce it or transmit by any means, to 

translate the document or to convert it to any electronic form in full or in parts without antecedent written approval of Fastwel Co. Ltd. or one of its 
officially authorized agents.  

Fastwel and Fastwel logo are trademarks owned by Fastwel Co. Ltd., Moscow, Russian Federation. Ethernet is a registered trademark of 

Xerox Corporation. IEEE is a registered trademark of the Institute of Electrical and Electronics Engineers Inc. Intel is a trademark of Intel Corporation. 
Pentium M and Celeron M are trademarks of Intel Corporation. Microsoft is a trademark of the Microsoft corporation. In addition, this document may 
include names, company logos and trademarks, which are registered trademarks and, therefore, are property of their respective owners.  

Fastwel welcomes suggestions, remarks and proposals regarding the form and the content of this Manual.

 

 

 

 

Содержание CPC309







































































Отзывы:

Нет отзывов