Fastwel CPC309 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 70

Fastwel CPC309 Скачать руководство пользователя страница 40

CPC309 Intel Atom D510-based SBC

Specification

3. For installing CPC309, the following actions should be performed:

- Before installing, make sure that the system power has been disconnected.

- Depending on the use, system configuration and temperature requirements, CPC309 is
installed in a number of ways:

- For CPC309 module with the heat-spreader installed:
Secure the module on a flat surface (if the module is intended to operate in a system or is
fastened to a chasses) by four screws. The installation dimensions are provided on Fig. 2 1:
Overall and connection dimensions of the module.

- For CPC309 with and additional finned heatsink:
Fix the heatsink on the heat-spreader with four screws (using thermal compound supplied with
the heatsink).
Fasten the module to the surface with the struts. Provide conditions for sufficient air cooling.

-

Connect the required external interface cables and power supply cable to module’s

connectors. Make sure that CPC309 and all the cables are reliably fastened.

Now CPC309 is ready for operation. Use the documents supplied with the software, devices
and the system as a whole to familiarize yourself with further actions.

Attention!

Incorrect power on may lead to module breakdown.

Attention!

When installing the CPC309 inside the sealed enclosure it is crucial to provide minimum thermal
resistance between module’s heat-spreader and heat-removing wall of the enclosure. This will
prevent excessive heating of system components within the enclosure.

«
...
38
39
40
41
42
...
»

Содержание CPC309







































































Отзывы:

Нет отзывов