Fastwel CPC309 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 70

Fastwel CPC309 Скачать руководство пользователя страница 10

CPC309 Intel Atom D510-based SBC

Specification

1. Introduction

1.1. Purpose

This User Manual (hereinafter referred to as the “Manual”) contains essential information on the
device and its operation principle, which is required for commissioning, intended use and
maintenance of C

PС309 CPU Module (hereinafter referred to as the “Module”).

Note: This document represents the current version of 0.1 version of the Manual

1

).

The Module is a single-board computer of StackPC-PCI format and is designed for embedded
applications requiring high performance and low power consumption.
The Module contains Compact Flash connector, 2x Ethernet channels, 8x USB ports, 2x Serial ATA
ports, 2 x serial ports, 1x NAND Flash drive.

Module’s functionalities can be extended by connecting additional modules in StackPC, StackPC-PCI,
PCI-104, PCIe/104, PCI/104-Express formats.
The module is supplied with pre-installed operating system (hereinafter referred to as the “OS”)
FreeDOS

2

)

and is compatible with the following OS: QNX 6.5, Windows XP (embedded), Linux 2.6.

The Manual contains instructions on proper and safe installation, start-up and configuration of the
module, connection and interaction with extension modules or external devices.
The Manual also provides solutions to problems related to start-up, debugging and use of basic and utility
software (hereinafter referred to as the Software).

For safe and correct use of the Module within the specified service life, it is required to previously read
and understand this Manual.

Warning: Non-compliance with the safety requirements, application notes and operation guidelines, is
prohibited!

3

)

Attention: Module contains components are sensitive to electrostatic discharge!

4)

Forbidden: Persons lacking adequate qualification and the required level of proficiency training CAN NOT
operate, maintain and repair the modules!

5

_________________________________________________________________________________________

1) This graphics symbol (sign) will be used together with an explanatory word “Note” and text.
2) If the preinstalled operating system option is not ordered, please see Table 1-1 below.
3) The graphics symbol (safety sign according to the ISO 3864:1984) is used along with the warning word “WARNING” and
warning text (according to the GOST 2.601-2006).
4) The graphics symbol (safety sign according to the ISO 3461-88, ISO 3864-84) will be used here along with the WARNING
word and warning text (according to the GOST 2.601-2006).
5) The graphics symbol (safety sign according to the ISO 3461-88, ISO 3864-84) will be used here along with the WARNING
word and warning text (according to the GOST 2.601-2006).

«
...
8
9
10
11
12
...
»

Содержание CPC309







































































Отзывы:

Нет отзывов