FT20CC
Fasttel België, Klipsenstraat 18A, 9160 Lokeren Tel +32 (0)9 244 65 20,
FT20CC: Manual ENG1.6
1.
Installation Instructions
•
Connect the video signal to the terminals V+ and V- (terminals 1 and 4 of the rear connector)
Caution! It is extremely important to maintain the polarity of the video signal.
•
Connect the power supply provided to the PP terminals (terminals 2 and 3). The polarity is not
important in this case.
•
When everything is connected correctly, a colour bar will appear in the display, followed by a
series of beeps, after which the display goes into standby mode.
2.
Configuration Instructions
After removing the extreme right cover, you will find two circular recesses with two push buttons.
V+ P P V-
1 2 3
