2.6.5
MACHINE SET
1. Used to disable the automatic shutdown caused by charge fault.
2. Used to disable the automatic shutdown caused by the gutter fault.
3. used to set the modulation value, manual/auto optional, auto mode only takes e
ff
ect
during startup.
4. Used to set the charge value.
5. Used to set the running pressure.
6. Used to set the heater target temperature.
7. Used to set the phase charge value.
8. Used to set the phase o
ff
set value.
9. Used to check the current software information.
10. Used to define the shortcut function on main screen.
11. Used to enable /disable the keyboard buzzer.
12. Used to set the system time and date;
13. Used to set the extra high tension leakage alarm value.
14. Used to set the output range of the 7KV extra high tension.
15. Used to change the gutter mode.
16. Used for serial port configuration.
17. Used for Ethernet configuration.
18. Used to set the printer language.
19. Used to view equipment maintenance time.
Page
10
