FASTERHOLT FM4400H, Руководство пользователя и каталог запасных частей

Страница: 12 / 96

12
Short instructions for use
Speed 30.0m/h
Dose 22 mm
Time 7:28 STOP 7:28
STATUS STOP Sensor
Speed 30.0m/h
Dose 22 mm
Time 7:56 STOP 17:16
STATUS STOP Sensor
Speed 25.0m/h
Dose 26 mm
Time 7:58 STOP 17:58
STATUS STOP Sensor
Speed 25.0m/h
Dose 26 mm
Time 7:58 STOP 17:58
STATUS STOP Sensor
Speed 25.0m/h
Dose 26 mm
Time 8:00 STOP 18:38
STATUS Running
Speed 25.0m/h
Dose 26 mm
Time 8:02 STOP 18:38
STATUS PRE Irri.
Speed 25.0m/h
Dose 26 mm
Time 18:20 STOP 18:38
STATUS POST Irri.
Speed 25.0m/h
Dose 26 mm
Time 18:38 STOP 18:38
STATUS STOP Sensor
Place Machine:
Move machine to a new lane. Display shows start and stop time.
Pull hose out to end of the lane. (e.g. 250 m)
Select Speed:
Display now shows stop after 9h 20m. Press the “+” or “-” key to set
the speed. Speed can be adjusted during irrigation.
SPEED has decreased, DOSE has increased and STOP time is later.
Start Irrigate, Select PRE- and POST Irrigation:
Press START to start. Press PRE and POST for pre- and post-irri-
gation respectively. STOP time will be later when PRE and POST
irrigation are selected.
Starting
The turbine will start when the water pressure increases. After a
short period, the regulator finds the correct speed. Irrigation con-
tinues until STOP SENSOR is activated at the end of the lane.
PRE Irrigation:
If pre-irrigation is selected, the turbine stops immediately after
performing a start and pre-irrigation. When the pre-irrigation time
has elapsed, the turbine starts and the machine changes status to
Irrigating.
POST Irrigation:
If post-irrigation is selected, the turbine stops at the end of the
lane when the stop sensor is activated. Post-irrigation then starts.
Stop:
Stop sensor is activated, turbine and water are shut off. The ma-
chine is now ready to be moved to a new lane.