PoE Powered Switch Guide EN
Thank you for picking us over the competition. For years we have been a leading provider of PoE over cat5
and Power Fiber System. Please take a few minutes to read through this guide before you get start. Not
only there are some helpful tips, but also we have some guides to help you plan and install your switch.
Installation Requirements
This product is designed for indoor application, pick the cat5e (or higher category) UTP cable. We recommend you to
choose pure copper UTP cable. Pure copper not only can guarantee a maximum of transmission distance, but also
the bandwidth.
NOTE: Do not expose this switch to rain or moisture environment which may cause electric shock or fire.
Hardware Overview
Front Panel
Port
Description
1S-4S
RJ45 port – 10/100/1000 Ethernet with PoE, support IEEE802.3af/at.
5S
RJ45 port – Powered by IEEE802.3af/at/bt PoE &10/100/1000 Ethernet for uplink.
LEDs
Status
Power
OFF – power off
Yellow- Power ON
1-5
(Link/ACT)
OFF-No Link
Red-10/100/1000mbps link flashing indicates data exchanging.
1-4
PoE
OFF-No POE
Yellow - 48V standard PoE.
