Fastbind BooXTer® Zero Max™
Operating instructions
Main parts
1. Main support plate
2. Back shelf
3. Aligning tool
4. Rapid Heavyduty 210 Stapler
a) Rapid Stapler - Handle
b) Rapid Stapler - Staple-clip opener button)
c) Rapid Stapler - Stapling Base
5. Aligning slots
a) Aligning slots (International paper)
b) Aligning slots (Letter paper)
6. Frontal Cover-holding magnet
7. Side Cover-holding magnet
8. Cover-guide stick
9. End sheet support shelf
v.01 eng
3
2
13
12
14
11
15
8
9
10
5a 5b
4a
4b
4c
1
6
7
Warranty
Maping Co warrants this product against defects in material or
workmanship as follows. For the period of twelve months from
the date of purchase, repair or replace free of charge, for the
original purchaser, any part or parts found by inspection to
be defective by our factory authorized service outlet or by the
manufacturer at Espoo, Finland. All transportation charges on
parts submitted for repair or replacement under this warranty
shall be paid for by the purchaser.
All service under this warranty will be furnished and performed
by factory authorized service stations or by the manufacturer.
Warranty service does not extend the warranty period.
This warranty is limited to the value of the product and it does not
cover damage caused by:
•
Transportation
•
Normal wear and tear
•
Neglected or improper maintenance,
•
Misuse
The warranty will be voided if machine’s type plate has been
wholly or partially removed or erased. Maping Co is not
responsible for any damages, including but not limited to direct,
indirect or consequential damages, loss of material, profit or
interruption of business. Maping Co may at any time discharge
its warranty by refunding the purchase price and taking back the
product.
Supplies
For more information about the usage and supplies visit:
http://www.fastbind.com/info/zero
Supplies include, but are not limited to:
•
Hard covers:
•
Windowed
•
Plain
•
A4, Letter size
•
BooXTer Stripe
•
BooXTer End Sheets
2011 Copyright Maping Co. Reproduction, adaptation or translation without prior written permission is prohibited,
except as allowed under applicable copyright laws. The information contained herein is subject to change without notice.
10. Cover support shelf
11. Stripe Inset
12. Staple box slots
13. Staple measurer
14. Cover measurer
Package also includes
15. Rapid Staples including following staple sizes:
a) 9/24 or 23/24
b) 9/20 or 23/20
c) 9/17 or 23/17
d) 9/14 or 23/15
e) 9/12 or 23/12
f) 9/10 or 23/10
g) 9/8 or 23/8
