![background image](http://html1.mh-extra.com/html/fast-and-fluid-management/harbil-ha180/harbil-ha180_operating-and-safety-manual_3535066015.webp)
15
Operator manual
HA180
V. 2.0
3.1.6
Overview of the display
A:
Emergency stop indicator
B:
Canister refill indicator
C:
Error / counter display
D:
Error indicator and Error / function key
E:
Can indicator
F:
Computer switch key
G:
Brush refill indicator
H:
Brush monitor indicator
/i
H
A
C
B
F
E
D
G
Item
Function
Indicator
When the indicator is on, it shows the status of the item or problem. See
for
possible causes and solutions.
Error / counter
display
The display shows:
-
The error codes
-
The software version
-
The seconds that remain for the dispense operation
See
for a description of the error codes and the possible causes and solutions.
Error key
When you push the error key, the error display shows the program version. When you
push the error key for more than 5 seconds, the machine will start/initialize.
Function key
When you push the function key, the counter display shows the software version.
Computer switch
key
When you push the computer switch key, you will hear ‘two beeps’; the button will flash.
When you push and hold the computer switch key for 5 seconds, you will hear a beep
again and the PC will shut down.
Can indicator
The can indicator shows the status of the can:
-
Flashing green: the dispense is done
-
Flashing red: the can is missing (the sensor does not see the can)