Fasep TOP AUTOMATIC 4.0, Руководство по эксплуатации и техническому обслуживанию

Страница: 41 / 86

OPERATING AND MAINTENANCE MANUAL
RASE.TOP.4028
Code DOC. UM TOP AUTOMATIC 4.0
Rev. 6
Page 41 of 86
41
5.3 – STARTING THE MACHINE
The customer is obligated to perform inspections to identify any non-conformities on the machine
prior to starting it:

Check rating plate data of the electrical components and the corresponding supply
available.

Check for the presence of all ID plates (ref. par. 2.2) and danger signs (ref. par. 3.5).

Check operation of the safety devices: emergency button (ref. par. 3.4).
To start the machine, perform the following operations:
1. Turn the main power switch to ON (ref. fig. 16 a);
2. Wait a few seconds until the touch screen displays the screen that allows the operator to
manage the work cycle;
3. Press START/AUX on the control panel (ref. fig. 5, no. 12).
The operator manages the work cycle using the touch screen and control panel and performing
several manual operations. The controls on the touch screen are described in figure 22.