En
FARO Laser Scanner Photon – User’s Manual
68 / 87
disable
Automatic
mode. Please note that changing the number of
columns manually results in scans which have no 1:1 ratio between
rows and columns. It is recommended to use this only in special
circumstances.
•
Min. Reflection
: Will filter out scan points with reflection value lower
than given here.
•
Eye Safety Dist
.
:
This eye safety distance gives the radius of safe
operating area known from SCENE Record.
Please note:
If you
change the resolution and the X-control value, the appropriate eye
safety distance will be calculated and displayed only after having
pressed the
Apply
button
.
8.2.3
Color Page
Fig.87 Color Page
If the scanner is equipped with the color option, you can checkmark the
option
Scan with Color
in order to get a colored scan. Using this checkbox
corresponds to clicking the button
Start scan with color
in SCENE Record.
Before you start you have to choose the right camera mount (Non-winding
or no parallax) on tab
Camera
in the
Scanner Parameter
dialog using SCENE
Record (see chapter 7). This setting will be stored on the scanner and has to
be done once.
Other settings on this page correspond to the settings on tab
Camera
in the
Scanner Parameter
dialog in SCENE Record.