En
FARO Laser Scanner Photon – User’s Manual
36 / 87
Fig.35 Settings
Max Scans
- Specifies the maximum number of scans that are kept in the
memory of the operating PC.
View Scans while recording
- If checked, the scan will be displayed online
during scanning. For this option, the operating PC needs enough main
memory to hold a full scan and must be fast enough to display the scan
online.
Adjust point of view while recording
- If checked, the online display of
the scan will be re-centered constantly.
6.3.3
Scanner selection
Fig.36 Scanner selection
Status
: There are four possible states
Not Connected:
No PC is connected to the scanner.
Connected:
The scanner is connected to the operating PC.
Busy Line:
The scanner is connected to a different PC.
Net Incompatibility:
The scanner is located in a different network. The
IP- address of the scanner has to be changed in order to be able to connect
to the scanner.
Actions:
(right click on the scanner’s name will open the context menu)
•
Connect:
Establish a connection with the scanner.
•
Break and Connect:
Allows breaking an established connection
between scanner and a PC different from the operating PC. After the
connection has been ended, a new connection will be established
between scanner and operating PC.
