Basic Training Workbook
Version 1.5 - August 2007
46
Chapter 4: Basic Part Measurements (Metrology Mode)
Practical - Basic Part Measurements (Metrology
Mode)
For this practical, we will use the FARO Demo/Training part and the following prints:
N
OTE
: Refer to the Demo/Training part diagram in the cover section.
Setting the Alignment
A part print with clearly defined datums will typically require a coordinate system (or
alignment) to be created before inspecting.
1
Select the CLEAR PART button. If desired, save the tool.
2
Ensure you’re in MEASURE mode (select the MEASURE switch).
3
Identify and measure the datum features first.
•
The top face of the plate is Datum A. (Typically defines the XY plane)
P
ART
P
RINT
B
B
3
1
2
A
B
1
C
D
03FRM049-REV 1
B
5
4
5
4
3
2
A
C
D
THIS DRAWING AND ALL THE INFORMATION THERIN
IS THE PROPERTY OF FARO TECHNOLOGIES,
INCORPORATED. THIS DRAWING IS CONFIDENTIAL
AND MAY NOT BE MADE PUBLIC OR REPRODUCED
WITHOUT THE EXPRESS PERMISSION OF FARO
TECHNOLOGIES, INCORPORATED. THIS DRAWING
IS LOANED SUBJECT TO RETURN UPON DEMAND
AND SHALL NOT BE USED DIRECTLY OR INDIRECTLY
IN ANY WAY DETRIMENTAL TO THE INTERESTS OF
FARO TECHNOLOGIES INCORPORATED.
THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETERS TOLERANCES ARE:
X .X .XX .XXX ANGLE
±0.25 ±0.1 ±0.05 ±0.01 ±1°
INTERPRET DRAWING PER DOD-STD-100
AND ASME Y14.5. DO NOT SCALE DRAWING
TITLE
Armed with Quality
BASE, DEMO FIXTURE
THREADS IN ACCORDANCE WITH HANDBOOK 28
FINSH REQUIRED
63
15
[.591]
[1.181]
30
15
[.591]
15
[.591]
8X 20 [0.798]
EQ. SP. ON A
140 [5.512] BC
25
[.984]
+0.25
-0.10
Ø 1.0
M
A
B C
A
.50
50
[1.969]
30
[1.181]
25
[.984]
100
[3.94]
15
[.591]
65
[2.559]
170
[6.693]
4X 5
[.197]
50
[1.969]
50
[1.969]
30
[1.181]
C
60
[2.362]
.50 A
.50
15°
160
[6.299]
15
[.591]
25
[.984]
255
[10.04]
20
[.787]
40
[1.575]
150
[5.906]
C
265
[10.433]
300
[11.811]
240
[9.449]
65
[2.559]
130
[5.118]
167
[6.575]
15
[.591]
15
[.591]
50
[1.969]
20
[.787]
20
[.787]
50
[1.969]
65
[2.56]
B
.50
.50 B
20
[.787]
SECTION B-B
