Faro FOCUS3D X 130, Руководство пользователя

Страница: 48 / 190

FARO
®
Laser Scanner Focus
3D
X 130 Manual
January 2014
40
Chapter 5: Getting Started
Proceed accordingly with the
month
and the
day buttons
.
Discard Changes
- Click to discard your changes.
Leaving the view with the
back
or
home button
applies your changes. A
message will be displayed, informing you that you may need to restart the
scanner for the changes to take effect.
Setting the Unit of Length and the Temperature Scale
You can change the units scale under
Home > Manage > General Settings >
Units
.
Lengths will be displayed by the controller software either in meters or in feet.
Select the favored unit of length by touching the corresponding button.
Temperatures will be displayed either in Celsius or in Fahrenheit scale. Select the
favored temperature scale by touching the corresponding button.
GPS coordinates are either displayed in decimal degree notation (e.g.
+34.9823450° E) or in degree-minute-second notation (e.g. 34º 58' 56.44'' E).
Figure 5-13 Restart Scanner
Figure 5-14 Change Unit of Length