Removing the PanoCam Mount From the Scanner
!
Power off the camera and the FOCUS scanner.
"
Undo the latches and rotate them so they are free from
the lip edges on the scanner.
#
Rotate the camera/mount assembly upward about 45
degrees, and then pull the assembly away from the
scanner.
$
Use the hex key to loosen the camera screw.
%
Remove the camera, being careful not to damage the
USB-C connectors.
&
Store the camera and mount safely. To protect the
camera and the lenses, use the soft cover included with
your panoramic camera.
FARO
®
FOCUS® Laser Scanner Accessories Manual
Chapter 5: PanoCam
FARO FOCUS® LASER SCANNER (00.00)
Page 25 of 36
