Faro Focus 3D X 130, Руководство по обучению

Страница: 64 / 340

48
MMMMMM MM MMMMM MMM MMMMMMM
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
• Additional Info – Record notes and additional information.
• Latitude – Enter the approximate latitude (±10 degrees) of the
scan. Enter the latitude using decimal degrees.
To open a project and edit project information:
• Tap Manage > Projects . Tap the blue arrow next to the project
name you want to open. Tap a field to edit as needed.
If you do not create a project on the scanner, then scans will be
automatically placed in the Default_Project folder.
TMMMbMMMMMMMMMM
Make sure the FMMM BMMM NMmM and/or the IMMMMMM MMMM NM.
are unique, or all scans will be consecutively numbered,
regardless of the file structure.
AMMMvMMy M.5M
CMMMMMMM MMM PMMjMMM FMMMMM MMMMMMMMM
In this activity, you will create a new parent project with three
subprojects. The subprojects will be used in later activities.
Follow these steps:
1. Create a new parent project.
A. Tap MMMMMM > PMMjMMMM .
B. Make sure DMfMMMM_PMMjMMM is selected.
C. Tap AMM .
D. Change the project name.
I. Tap PMMjMMM NMmM .
II. Tap
DMMMMM
.
III. Using the on-screen keyboard, enter Training_
[ Your Initials ] .
Slide 50