Faro Focus 3D X 130, Руководство по обучению

Страница: 248 / 340

232
MMMMMM MM MMMMMMMMMMMM MMMM M MMM
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
To inspect the clipping box by rotating the scan data, click the
Examine
tool, then click the Set Rotation Point tool, then click inside the clipping
box.
TMMMbMMMhMMMMMM
After creating a clipping box, you can only use the SMM
MMMMMMMM PMMMM
button within the clipping box.
CMMMM VMMM
When working with clipping boxes, it can be helpful to use Clear View ,
which is a semi-transparent mode in
3D View
.
Clear View
allows you
to see through the scan point clouds, which can be useful when working
with clipping boxes.
To turn Clear View on or off, in the 3D Toolbar , click Toggle Clear
View
.
You can also press
C
on your keyboard to switch
Clear View
on and off.
LcMMvMMy M.3M
MMMMMMM MMMh CMMppMMM BMxMM
In this activity, you will practice working with clipping boxes.
Follow these steps:
1. In 3D VMMM , use the navigation tools, the mouse, and the
mouse wheel to navigate to a convenient view.
2. Create a clipping box.
A. In the 3D TMMMbMM , click the CMMMMM M MMM CMMppMMM
BMx
tool.
3. Use the navigation tools, the mouse, and the mouse
wheel to view the clipping box, and use the buttons
If buttons in the
toolbars are
unavailable, try
clicking in the image
area.