Faro Focus 3D X 130, Руководство по обучению

Страница: 223 / 340

207
LMMMMM 2M IMMpMcMMMM MhM MMMMMMMMMMMM MMMMMMM
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
LMMMMM 2M
Inspecting the Registration
Results
Every registration has a certain amount of error. Inspecting the
registration ensures that the scans have been registered properly and that
the amount of error is within your tolerance. Your tolerance for error
depends on project requirements.
There are two ways to inspect the registration:
• Using the
ScanManager
.
• Using 3D View .
UMMMM MhM ScMMMMMMMMM
The
ScanManager
displays the status of the registration and classifies
the results as good (green traffic light), medium (yellow traffic light), or
poor (red traffic light).
During
Preprocessing , SCENE automatically creates a ScanManager .
You can also manually create a ScanManager .
To manually create a
ScanManager
:
1. In the Structure window, right-click on a cluster.
2. Click
New
>
Scan Manager
.
There are either three or four tabs in the ScanManager , depending on
whether you choose Target Based or targetless registration.