66
113539
Revision date: 01.13.21
3. With a metal-cutting saw or tool, cut the legs for the support frame. Use
three (3) 131P072 pipes
and cut as follows:
— Two (2) legs at 33-1/2"
— Two (2) legs at 34-3/4"
— Two (2) legs at 36"
ATTENTION:
Measure the tubes to ensure you have chosen the correct ones. Do not use the 49-1/2" tubes to cut the leg pipes!
4. Slide each leg into position as shown and tighten the base pipe tee fitting set screw to secure the legs.
5. Place a tee fitting at the end of each leg. Slide a scrap piece of 1.315" pipe cut from a leg pipe to properly set the fitting position if desired.
Assemble on a flat surface to keep the fittings square on the end of the leg pipes. Lock the fittings in place by tightening the set screws and
repeat the process for the remaining base pipes.
ASSEMBLE MAIN SUPPORT FRAME (continued)
1
Assembly Instructions
Side View of Base Assembly
INCORRECT
CORRECT
33 1/2"
34 3/4"
36"
Create two (2) base assemblies.
