Farmi Forest W35R Скачать руководство пользователя страница 41

Страница: 41 / 42

W35R

WARRANTY

Farmi Forest Oy grants a 12-month warranty on all of its products, covering material and manufacturing faults. The

warranty comes into effect on the product’s delivery date.

The manufacturer is not liable for damages caused by:

•

misuse of the product

•

alterations or repairs made without the

manufacturer’s permission

•

insufficient maintenance

•

non-original parts.

The warranty does not cover wearing parts.

Send faulty parts, carriage paid to the manufacturer for inspection. The reseller of the product helps on that. Repairs
will be conducted by Farmi Forest Oy or an authorized expert. The warranty is valid only if the product has been

registered according to the manufacturer

’s instructions

within 30 days of receipt of the product.

By registering the product you are ensuring the warranty, and you confirm that you have read and understood the

instruction manual that came with the product.

FARMI FOREST REPRESENTATIVES

FARMI products are marketed around the world

–

over 80% of end-users are outside Finland, located in over 30

countries. Over 40 importers or representative agents process the company’s sales and distribution.

All FARMI representatives can be found on our home page

https://shop.farmiforest.fi/dealers

please visit

there.

Farmi Forest
Kilpivirrantie 7

74120 IISALMI
FINLAND

Содержание W35R











































Результаты поиска

Содержание W35R

Отзывы:

Похожие инструкции для W35R

Бренды по названию

Популярные бренды

Farmi Forest W35R, Руководство по эксплуатации, техническому обслуживанию и запасным частям

Результаты поиска

Содержание W35R

Отзывы:

Похожие инструкции для W35R

Бренды по названию

Популярные бренды