27
│
40
Manual
TRITON 450 PS
|
600 PS
TRITON 450 PS
8
MACHINE
TRANSPORT
ON
ROADS
Transport position of
TRITON 450 PS
|
TRITON 600 PS
Connect the machine by attaching it to the tractor.
Lift the machine on the axle, switch the ball valve of the axle to the closed position.
Fold the side frames to the transport position, switch the ball valve to the closed position.
Install the transport rod between the side frames (see the picture).
Tighten the centre piece on the rod by screwing and secure with locking nut.
The machine must be equipped with removable shields with marking of contours, functional lighting,
and the board of the rear marking for slow vehicles (according to ECE No. 69).
The lighting must be activated during travelling on roads.
The tractor must be equipped with a special light device of an orange colour, which must be activated
during travelling on roads.
The maximum transport speed during travelling on roads is 30 kph.
Transportation is only permitted when the connecting rod has been properly installed and
secured!
CONNECTING
ROD
1
2
3
CONNECTING
ROD
