Farmet TRITON 600 PS, Руководство по эксплуатации

Страница: 26 / 40

26
│
40
Manual
TRITON 450 PS
|
600 PS
TRITON 450 PS
6 AGGREGATION TO A TRACTOR

The machine can be connected only to a tractor, whose curb weight is identical or higher than the
overall weight of the connected machine.
 The machine operator must observe all generally valid regulations of work safety, health protection, fire
safety, and environmental protection.
 The operator may connect the machine exclusively to a tractor that is equipped with a rear three-point
suspension and a functional undamaged hydraulic system.

It is possible to use the transport axle with the valve on the drawbar piston rod closed to set the height
of the drawbar
.
The table of requirements for the towing means for work with the machine:
Requirement for the tractor engine power for cultivator
TRITON 450 PS
225-350 kW
Requirement for the tractor engine power for cultivator
TRITON 600 PS
350-460 kW
Requirement for the bottom hitch Bottom hitch
C 50
C 70
K 80
Requirement for the tractor's hydraulic system
Side frame folding circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler
sockets ISO 12,5
Depth adjustment circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler
sockets ISO 12,5
Axle lifting circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler
sockets ISO 12,5
Levelling disc circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler
sockets ISO 12,5
Circuit for lifting the front disc
section
Circuit pressure 200 bar,
2 pcs of quick-coupler
sockets ISO 12,5
When connecting, no persons may stay in the space between the tractor and the machine.
7 FOLDING AND UNFOLDING OF THE MACHINE
 The hydraulics for the folding and unfolding must be connected to the double-action control unit.

The operator must ensure that during folding and unfolding of the side frames, no person or animal is
within their reach (i.e. at the place of their impact) or vicinity.
 Perform folding and unfolding on flat and solid surfaces or laterally to the slope with the fully open
control unit.

Folding and unfolding may only be performed when the machine is lifted on the axle.
 Remove stuck soil from folding points, soil may impair function and cause damage to the mechanics.

During folding or unfolding, check the side frames and have them continuously fold into the end position
to the stoppers
.
Attention!!! The machine must be lifted on the axle prior to folding and when folded!!!