10.3 Adjusting the longitudinal plane of the machine
• With the use of the TBZ shoulders of the tractor, or the spacing washers on the piston rods of the
drawbar, adjust the machine so that the front and rear row discs work in the same depth.
1 – Soil
2 – Setting the same depth for front and rear disc rows
3 – TBZ shoulders of the tractor
4 – Fixed suspension version, Depth setting
5 – Setting the depth by rear rollers
The machine features high stability during operation. However turning of machine to one side may oc-
cur with fault adjusted longitudinal plane (particularly in heavy soils). This is removed by modification of
tractor arm height as follows, or by adding or removing spacing washers on the drawbar piston rods:
• When the machine turns to the right-hand side, lift the machine in arms, or remove washers on the
drawbar piston-rods
37
|
50
Содержание SOFTER 9 PSW
