8.1 Agregation to a tractor
•
The machine can be connected only to a tractor, whose curb weight is identical or higher than
the overall weight of the connected machine.
•
The machine operator must observe all generally valid regulations of work safety, health
protection, fire safety, and environmental protection.
•
The operator may connect the machine exclusively to a tractor that is equipped with a rear
three-point suspension (or bottom fixed suspension) and a functional undamaged hydraulic
system.
•
The table of requirements for the towing means for work with the machine:
Requirement for the tractor
engine power for disc plough-
harrow
SOFTER 4 P
110-160 kW (150-215 HP)
SOFTER 4,5 PS
120-150 kW (160-200 HP)
SOFTER 5 PS
130-190 kW (175-255 HP)
SOFTER 6 PS
150-225 kW (200-300 HP)
Requirement for tractor
aggregation
Spacing of the lower suspension
joints (measured at the joint
axes)
1010±1,5 mm (39,76 in),
(possible to set also 910±1,5 mm
/35,83 in)
Øof the hole of the lower
suspension joints for the
machine suspension pivots
Ø37,5 mm (Ø1,48 in)
Height of the bottom fixed
suspension
500 – 600 mm (19,7 - 23,6 in)
Mechanism of the aggregation of
the bottom fixed suspension
Pin Ø 50mm (1,96 in)
Pin Ø 70mm (2,75 in)
Ball K80
Requirement for the tractor's
hydraulic system
Side frame folding circuit
*does not apply to SF4P
Circuit pressure 200bar
(2900Psi), 2 pcs of quick-coupler
sockets ISO 12,5
Axle lifting circuit
Circuit pressure 200bar
(2900Psi), 2 pcs of quick-coupler
sockets ISO 12,5
Rollers lifting circuit
Circuit pressure 200bar
(2900Psi), 2 pcs of quick-coupler
sockets ISO 12,5
•
Connect the machine using the TPS suspension bar to the lower arms of the rear TPS of the
tractor, secure the TPS arms using pins against disconnecting, or connect the machine to the
fixed bottom suspension and secure it against disconnecting.
•
If the drawbar of the machine is equipped with a safety chain, attach it to the tractor.
When connecting, no persons may stay in the space between the tractor and the machine.
21
|
44
Содержание SOFTER 4P
