Farmet SOFTER 15 PS, Руководство по эксплуатации

Страница: 19 / 23

Manual
SOFTER 15 PS | 20 PS
19
│
23
5.3 SETTING SIDE DEFLECTORS AND EDGE DISCS

According to the type and quantity of plant residues, it is necessary to set the side deflectors.
Fig. 12 – Options for side deflector settings

The position of the edge discs is adjustable and they allow different recess against other discs. The
adjustment is executed so that the working depth of the edge discs is lower (approx ½ - ¼ of the depth of
the other discs) so that no unevenness is created on the land.
Fig. 13 – Options for edge disc settings
6. MACHINE MAINTENANCE AND REPAIRS
Observe the safety instructions for treatment and maintenance.

If it is necessary to weld during the repair and have the machine connected to the tractor, it must have
disconnected supply cables from the alternator and the accumulator.

Check the tightening of all screw and other assembly connections at the machine before every use of the
machine, furthermore continuously as needed.

Continuously check the wear of the working bodies of the machine, possibly replace these worn working
bodies with new ones.

Adjustment, cleaning, and lubrication of the machine may only be performed with the machine at rest (i.e.
the machine is standing and not working).
 When working on a lifted machine, use suitable support equipment supported at marked points or at points
suitable for that.

During adjustment, cleaning, maintenance, and repair of the machine, you must secure those parts of the
machine that could endanger the operator by falling or another movement.

For catching the machine during handling using lifting equipment, use only the places marked with self-
adhesive labels with the chain sign "
".

Upon a failure or damage of the machine, immediately turn off the tractor's engine and secure against
restarting, secure the machine against movement

only then you can remove the failure.

During repairs of the machine, use exclusively the genuine spare parts, suitable tools and protective
equipment.
 Regularly check the prescribed pressure in the machine tyres and the condition of the tyres. Perform
possible repairs of the tyres in an expert workshop.

Keep the machine clean.
Do not clean hydraulic cylinders and bearings with a high-pressure cleaner or direct water stream. The
seals and bearings are not watertight at high pressure.