Farmet FANTOM 650 PRO, Руководство по эксплуатации

Страница: 24 / 61

COMMISSIONING
8.2 Hydraulics
• Connect the hydraulics only when the hydraulic circuits of the machine and the tractor
(aggregate) are in a pressure-less condition.
• The hydraulic system is under high pressure. Regularly check for leaks and immediately
remove obvious damage of all lines, hoses, and pipe unions.
• When seeking and removing leaks, use only the suitable tools.
• For connecting the hydraulic system of the machine to the tractor, use the plug (on the
machine) and the socket (on the tractor) of the quick-couplers of the same type. Connect the
quick-couplers of the machine to the hydraulic circuits of the tractor so that the (RED DUST
CAPS) for folding side frames is on one control circuit, the (YELLOW DUST CAPS) for lifting the
machine on the axle is on the second control circuit that must be switched to the floating
position during work!!! and the setting of the working depth (GREEN DUST CAPS) on the third
control circuit, control of flexi-boards and supporting leg (BLUE DUST CAPS) on the fourth
control circuit and control of the setting of rollers (WHITE DUST CAPS) on the fifth circuit.
In order to prevent accidental or foreign person (children, passengers) caused movement of the
hydraulics, the control switchboards on the tractor must be secured or blocked in the transport
position.
Parts of the hydraulic system of the machine, which are under pressure, are forbidden to
disassemble. Hydraulic oil that penetrates the skin under high pressure causes severe injuries.
In case of injury, seek a physician immediately.
24 | 61