Farmet DUO, Руководство по эксплуатации

Страница: 20 / 48

OPERATING MANUAL
OILSEED SCREW PRESS FARMET DUO
Page 20 of 48
5. ACTIVATION AND SHUTDOWN
5.1 SAFETY INSTRUCTIONS FOR THE OPERATOR
The Operator must not:

Activate or use the Equipment when the covers are removed or damaged

Touch the moving parts of the Equipment

Work with the Equipment when the working area of the Equipment and the
workstation are not sufficiently illuminated

Perform the maintenance, cleaning, repairs and adjustments of the Equipment
when in operation

Discard and remove safety protective and locking devices

Take off or remove the covers unless the machine is in complete standstill and the
shutdown condition has been secured

Remove the aluminium hopper from a press that has not been switched off and
from a press in operation

Insert limbs into the hopper and the gap created by removing the hopper

Connect the equipment to a power supply with damaged cables or damaged
distributor covers

The Operator must get acquainted with the Equipment, its function and control
elements prior to its first use.

The Operator must check the Equipment with regard to its completeness, work safety,
work hygiene, fire safety, traffic safety and protection of the environment prior to each
use (activation after a shutdown).

The Operator is responsible for the safety and all damages caused by the operation of
the Equipment.

The Operator must observe the technical and safety regulations for the Equipment
specified by the Producer.

The Operator must prevent unauthorized access to the rotary parts of the Equipment.

Check the condition of the Equipment prior to its activation. It is forbidden to active
the Equipment when showing signs of damage.

It is required to use working clothes, gloves, shoes with anti-slip soles and protective
goggles when operating the Equipment.

It is recommended to use anti-noise protectors when moving around the pressing shop.
It is a workplace with periodical supervision and operation.