Farm King Model 1050, Руководство оператора и каталог запасных частей

Страница: 90 / 174

88
Maintenance - 10" Backsaver Auger
SERVICE SCHEDULE
Maintenance Intervals
Maintenance work must be done at regular intervals. Failure to do so will result in excessive wear and early
failures. The service schedule is a guide for correct maintenance of the Backsaver Auger.
# DESCRIPTION
SERVICE PROCEDURES
Check Clean Lube Change Adjust Drain Locations
Daily Maintenance (or every 8 hours)
1 CV Joints, U-Joints and Bearings •
2 PTO Driveline •
3 Universal Joint (Front) •
4 Lower & Upper Lift Arm Pivots •
5 Hopper Drive Shaft & U-Joints •
6 Intake Auger Shaft & U-Joints •
7 Dual Auger Hopper Drive Chains •
Weekly (or every 50 hours)
8 Lower Intake Auger Gearbox Oil Level •
9 Upper Intake Auger Gearbox Oil Level •
10 Main Gearbox •
11 Wheel Lug Nut Torque •
12 Winch Cable •
13 Bridging Cable Tension •
Semi-Annually (or every 250 hours)
14 Bridging Cables • • •
15 Backsaver Auger •
Annually (or every 500 hours)
16 Lower Intake Auger Gearbox Oil •
17 Upper Intake Auger Gearbox Oil •
18 Main Gearbox •
19 Main Tubes •
Instructions are necessary before operating or servicing equipment. Read and understand the Operator
and Parts Manual and safety signs (decals) on equipment. Follow warnings and instructions in the
manuals when making repairs, adjustments or servicing. Check for correct function after adjustments,
repairs or service. Untrained operators and failure to follow instructions can cause injury or death.