manualshive.com logo in svg

Farm King HS8525, Руководство оператора и каталог запасных частей, Страница: 88 / 172

Поделиться
Скачать
Farm King HS8525 Скачать руководство пользователя страница 88

88

Operation - High Speed Compact Disc

Setting End Shield and LH Rear Blade

The LH end shield and adjustable LH rear blade are

designed to eliminate any trench that may be caused

by the rear LH end blade. The end blade on the LH rear

row of blades cuts the soil and throws the soil

towards the center of the disc, which may leave a

trench depending on soil type.

Figure 150

The LH rear end blade is adjustable by loosening the

three bolts (1, 

Figure 150

) at the bottom end of the

blade arm.

The blade can be moved up or down by 38 mm (1-1/

2") as desired.

Adjusting the blade up will throw less soil leaving less

of a trench.

Adjusting the blade down will throw more soil which

may result in a larger trench.

Figure 151

The end shield (1, 

Figure 151

) needs to be set to

move the soil coming off the last front blade and feed

the soil into the void left from the last rear blade. 

Loosen the four 5/8” bolts (2) on the end shield tube

(3) and slide the end shield forward or back in slots. 

To adjust the end shield up or down, attach a strap

and lifting device to the end shield tube assembly.

Remove the four bolts (2) and adjust the end shield

tube up or down by moving the end shield mount tube

to the desired holes.

Set the end shield to run just above the ground using

the bottom of the blade as a reference point and the

depth the blades are being set to. The fore-aft position

of the shield should cover at least three quarters of

the rear blade.

B-17152

1

B-17090

1

2

3

Содержание HS8525













































































































































































Отзывы:

Нет отзывов