Farm King BW200, Руководство оператора и каталог запасных частей

Страница: 24 / 82

Operation - 200 Bale Wrapper
22
ENTERING AND LEAVING THE
OPERATOR’S POSITION
IMPORTANT
Follow the instructions in your tractor’s operation
manual for the correct procedure.
Entering The Operator’s Position
Move to the operator’s position, start the engine
and release the parking brake.
Leaving The Operator’s Position
WARNING
AVOID INJURY OR DEATH
Before you leave the operator’s position:
• Always park on a flat level surface.
• Place all controls in NEUTRAL.
•
Engage the park brake.
• Stop the engine and remove the key.
Park the tractor / equipment on a flat level surface.
Place all controls in neutral, engage the park
brake, stop the engine and wait for all moving
parts to stop. Leave the operator’s position.
TRACTOR REQUIREMENTS
The Bale Wrapper will require a tractor with
minimum 40 hp (30 kw), one pair of remote
outlets, and electrical connection.
The wrapping machine shall be installed to the
lower hitch or to the upper hitch allowing for the
maximum vertical load of 4.7 kN.
WARNING
Keep shields and all guards in place.
Keep away from moving parts.
Keep bystanders away.
CAUTION
Using a tractor with greater HP than the
recommended range may cause severe damage to
frame or components of implement and thereby
void warranty.