manualshive.com logo in svg

Farm King 2400, Руководство оператора и каталог запасных частей, Страница: 107 / 112

Поделиться
Скачать
Farm King 2400 Скачать руководство пользователя страница 107

Warranty - Round Bale Carrier 2400

107

WARRANTY

Limited Warranty

BASE LIMITED WARRANTY

Farm King provides this warranty only to original retail purchasers of its products. Farm King warrants to such
purchasers that all Farm King manufactured parts and components used and serviced as provided for in the
Operator’s Manual shall be free from defects in materials and workmanship for a period following delivery to
the original retail purchaser of one (1) year. This limited warranty applies only to those parts and components
manufactured by Farm King. Parts and components manufactured by others are subject to their
manufacturer’s warranties, if any.

Farm King will fulfill this limited warranty by, at its option, repairing or replacing any covered part that is
defective or is the result of improper workmanship, provided that the part is returned to Farm King within thirty
(30) days of the date that such defect or improper workmanship is, or should have been, discovered. Parts
must be returned through the selling representative and the buyer must prepay transportation charges.

Farm King will not be responsible for repairs or replacements that are necessitated, in whole or part, by the
use of parts not manufactured by or obtained from Farm King. Under no circumstances are component parts
warranted against normal wear and tear. There is no warranty on product pump seals, product pump bearings,
rubber product hoses, pressure gauges, or other components that require replacement as part of normal
maintenance.

REPAIR PARTS LIMITED WARRANTY

Farm King warrants genuine Farm King replacement parts purchased after the expiration of the Farm King
Limited Warranty, and used and serviced as provided for in the Operator’s Manual, to be free from defects in
materials or workmanship for a period of thirty (30) days from the invoice date for the parts. Farm King will
fulfill this limited warranty by, at its option, repairing or replacing any covered part that is defective or is the
result of improper workmanship, provided that the part is returned to Farm King within thirty (30) days of the
date that such defect or improper workmanship is, or should have been, discovered. Such parts must be
shipped to the Farm King factory at the purchaser’s expense.

WHAT IS NOT COVERED

Under no circumstances does this limited warranty cover any components or parts that have been subject to
the following: negligence; alteration or modification not approved by Farm King; misuse; improper storage;
lack of reasonable and proper maintenance, service, or repair; normal wear; damage from failure to follow
operating instructions; accident; and/or repairs that have been made with parts other than those
manufactured, supplied, and / or authorized by Farm King.

AUTHORIZED DEALER AND LABOR COSTS

Repairs eligible for labor under this limited warranty must be made by Farm King or an authorized Farm King
dealer. Farm King retains the exclusive discretion to determine whether it will pay labor costs for warranty
repairs or replacements, and the amount of such costs that it will pay and the time in which the repairs will be
made. If Farm King determines that it will pay labor costs for warranty work, it will do so by issuing a credit to
the dealer’s or distributor’s account. Farm King will not approve or pay invoices sent for repairs that Farm King
has not previously approved. Warranty service does not extend the original term of this limited warranty.

Содержание 2400

















































































































Отзывы:

Нет отзывов