Farm King 1460 Скачать руководство пользователя страница 45

Страница: 45 / 168

Operation - Fertilizer Applicator 1460

Entering And Leaving The Operator’s Position

Entering The Operator’s Position

Move to the operator’s position, start the engine and
release the parking brake.

Leaving The Operator’s Position

Park the tractor / equipment on a flat level surface.

Place all controls in neutral, engage the park brake, stop
the engine and wait for all moving parts to stop. Leave the
operator’s position.

Follow the instructions in your tractor’s operation
manual for the correct procedure.

AVOID INJURY OR DEATH

Before you leave the operator’s position:
•

Always park on a flat level surface.

•

Place all controls in NEUTRAL.

•

Engage the park brake.

•

Stop the engine and remove the key.

•

Wait for all moving parts to stop.

Содержание 1460









































































































































































Результаты поиска

Содержание 1460

Отзывы:

Farm King 1460, Руководство оператора и каталог запасных частей, Страница: 45 / 168

Результаты поиска

Содержание 1460

Отзывы: