Farm King 1370 страница 56 Скачать руководство пользователя

Страница: 56 / 146

Maintenance - 1370, 1385, 1395, 13114 Backsaver Auger

STORAGE AND RETURN TO SERVICE

Storage

Sometimes it may be necessary to store the
equipment for an extended period of time. Below
is a list of items to perform before storage.

IMPORTANT

DO NOT permit children to play on or around the
stored machine.

• Thoroughly wash the machine with a pressure

washer or water hose to remove all dirt, mud, debris
or residue.

• Lubricate all bushings to remove any water residue

from washing.

• Remove any material that has become entangled

around any moving part.

• Inspect the hitch and all welds on the equipment for

wear and damage.

• Check for loose hardware, missing guards, or

damaged parts.

• Check for damaged or missing safety signs (decals).

Replace if necessary.

• Replace worn or damaged parts.

• Touch up all paint nicks and scratches to prevent

rusting.

• Place the equipment in a dry protected shelter.

NOTE: If a dry protected shelter is not available,

cover with a waterproof tarp and tie down
securely.

• Support the jack / frame with planks if required.

Return To Service

After the equipment has been in storage, it is
necessary to follow a list of items to return the
equipment to service.

• Be sure all shields and guards are in place.

• Lubricate the equipment.

• Connect to a tractor and operate equipment, verify

all functions operate correctly.

• Check for leaks. Repair as needed.

SAFETY SIGN (DECAL) INSTALLATION

IMPORTANT

When replacing safety signs (decals), the
temperature must be above 10° C (50° F).

• Remove all portions of the damaged safety sign

(decal).

• Thoroughly clean the area with adhesive remover

and glass cleaner. Remove all adhesive residue.

• Allow the area to dry completely before installing the

new safety sign (decal).

• Position the safety sign (decal) in the correct location.

• Remove a small portion of the backing paper on the

safety sign (decal).

• Press on the safety sign (decal) where the backing

paper has been removed.

• Slowly remove the remaining backing paper,

pressing on the safety sign (decal) as the backing
paper is removed.

• Using the backing paper, pressing firmly, move the

backing paper over the entire safety sign (decal) area.

NOTE: Small air pockets can be pierced with a

pin and smoothed out using the piece of
the backing paper.

Содержание 1370



















































































































































Результаты поиска

Содержание 1370

Отзывы:

Похожие инструкции для 1370

Бренды по названию

Популярные бренды

Farm King 1370, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание 1370

Отзывы:

Похожие инструкции для 1370

Бренды по названию

Популярные бренды