Farm King 1050, Руководство оператора и каталог запасных частей

Страница: 85 / 168

Operation - 1050, 1060, 1070, 1080 Backsaver Auger
83
AUGER OPERATION
Hopper Operation
WARNING
ENTANGLEMENT HAZARD
To prevent injury to fingers and hands:
• Keep hands clear of winch during operation
CUT HAZARD
To prevent injury to fingers and hands:
• Always wear heavy leather gloves when handling a
wire rope and operating the winch.
• Never guide the cable with your hands.
• Never let wire rope slip through your hands
• Frayed, kinked or damaged wire rope must be
replaced immediately.
• Always stand clear and keep others away during
operation.
• Never touch wire rope or hook while in tension or
under load.
• Never touch wire rope or hook during winching
operation.
IMPORTANT
Always maintain a minimum of three wraps of
cable on the drum of the winch.
Figure 121
With the hopper in storage position
[Figure 121]
:
• Raise the hopper slightly to release the safety chain
tension
• Remove the safety chain hook (Item 1) from the
hopper.
• Slowly lower the hopper to the ground.
Continue turning the winch handle until cable has
enough slack to be removed from the hopper.
Figure 122
Remove the lift boom / winch cable hook (Item 1)
from the hopper
[Figure 122] .
Move the hopper to the desired location.
NOTE: For mechanical winch, move the winch
handle counterclockwise (towards the
hitch) to raise the lift boom cable (wind
cable). Move the handle clockwise (away
from the hitch) to lower the boom cable
(unwind cable).
1
1