Com.X Administrator Guide
Page 87
Figure 88: Multiple DSS keys can be configured
to transfer to consecutive extensions
Select the Extension option and choose the first extension in the range. The first
highlighted key will then be set to the first extension selected and the subsequent
keys set to the next extensions featured in the list.
3.5.8.4 Adding an Extension Module
To add an extension module, simply click “Add”. Navigate to the correct EXT tab to
configure the soft keys of the extension module. Multiple extension modules can be
added to handsets that support them.
The EXT keys are configured as per section 3.5.8.1.
Note: Applying any changes to Managed SIP Devices from the Com.X GUI will
cause the handset to reboot. The device will reboot,and then update configuration
upon startup. This process results in the phone being unavailable for around one
minute after a Review/Apply.
3.6 Configuring Comma device ports
When a device is selected in the device list, the available ports on the device are
categorized and listed in the ports tree on the right of the Hardware panel. Comma
ports are enumerated using the device's name, the card index in the device and the
port number. I.e. device:a2-5 would indicate the fifth port on the second analogue
card (a – analogue, d – bri, p – pri) in a device called 'device'.
3.6.1 Configuring Analogue Trunk (FXO) ports
To edit the configuration of an FXO port, double-click on the desired port from the
ports tree on the right of the hardware panel.
©2010 –
2016
Far South Networks
Содержание Com.X
Страница 34: ...Com X Administrator Guide Page 34 Figure 26 Global Settings 2010 2016 Far South Networks ...
Страница 99: ...Com X Administrator Guide Page 99 3 7 4 2 Advanced configuration 2010 2016 Far South Networks ...
Страница 110: ...Com X Administrator Guide Page 110 Figure 92 SIP trunk basic configuration options 2010 2016 Far South Networks ...
