Far south networks Com.X, Руководство администратора

Страница: 84 / 211

Com.X Administrator Guide
Page 84
system.
SIP Server If Local Extension Port is disabled, this field can be edited to
contain the IP address of the remote SIP server on which the
extension is registering.
SIP Server Port If Local Extension Port is disabled, this field can be edited to
contain the port on which the extension should register on the
remote system.
Use Outbound
Proxy If enabled, an outbound proxy can be configured through which to
register the extension.
Outbound proxy The address of the outbound proxy through which the extension
registers with the remote system.
Outbound
Proxy port The port of the outbound proxy through which the extension
registers on the remote system.
NAT Traversal If enabled, the phone will use NAT to locate its remote host.
Note: In order for a line on a managed Sip phone to register as an extension on a
remote system, correct routing needs to be configured on both systems. This would
require a route to allow the phone to connect to the external network through the
correct interface, and a corresponding route on the remote system, directing traffic
to the phone to the correct interface.
3.5.6 Codecs
By default extensions created in the above manner, will be configured to support an
alaw codec. To add or remove supported codecs to the extension, right-click the
extension and select “Edit”. Select the “Codecs” tab. This will present a list of
available Codecs. To select multiple Codecs, hold “Ctrl” and click on the desired
Codecs.
©2010 –
2016
Far South Networks