Far south networks Com.X, Руководство администратора, Страница: 126 / 211

Com.X Administrator Guide
Page 126
Field Content
Name Unique name for the FlexPath. Spaces are not allowed in the
name.
Description Custom description for the FlexPath.
Account Code If configured, adds an account code to calls within a FlexPath
which can be used to group calls for billing purposes.
Lookup Caller ID If checked, the normal caller ID lookup will be performed prior
to routing. If unchecked, the “raw” port ID will be used for CID
routing.
Allow Directed
Pickup Other users of the system will be able to answer ringing calls to
extensions in the flexpath using the directed pickup. (by dialing
**<exten> from any handset)
Enabled Gateway
Recording If enabled, calls placed through this flexpath will be recorded.
Calls Originate
locally For gateway scenarios. If enabled, calls recorded on this
flexpath will be marked as outbound in the recordings and
CDRs.
Table 23: FlexPath configuration
3.12.6 Deleting FlexPaths
To delete a FlexPFlexPath, select “Delete” from the path's context menu. Confirm
deletion to delete.
Note: Ports that have beenassigned to a deleted FlexPath will become “invalid”,
resulting in no service for calls originating on such ports. Service to these ports can
be restored by assigning the ports either to the “default” FlexPath or to another
FlexPath.
3.12.7 Adding routes to a FlexPath
To add routes to a FlexPath, select “Add Route” from the path's context menu.
©2010 –
2016
Far South Networks