<
文档标题
>
button to transfer the first party to the second one.
Unattended / Blind Transfer
Unattended transfer is also known as
‘Fire and Forget’ mode. Instead of connecting to the second
party first and confirming the second call is established, user press [XFER] button first then dial the
second party number. When the number is dialed, user can press[XFER] button again and the first
party will be transfer to the second.
This is like helping the first party to dial to the second one. However, the transfer could be successful
if the second party answered it, or could be failed if the second party is busy or rejected it.
NOTICE! More advanced transfer configuration, please refer to
错误!未找到引用源。
错误!
未找到引用源。
.
6.2
Using Phonebook
User can save contacts
’ information in the phonebook and dial the contact’s phone number(s) from
the phonebook. To open the phonebook, user can press soft-menu button [Dir] in the default standby
screen or keypad.
By default the phonebook is empty, user may add contact(s) into the phonebook manually or from
call logs .
Содержание X3SP
