29
User can press up/down navigator buttons to switch screen page, and switch call focus
by pressing [
Resume
] button.
Ending One Call
User may hang up the current talking call by closing the audio channel or press [
End
]
button. The device will return to single call mode in holding state.
9.3 End of the Call
After the user finishes the call, the user can put the handle back on the phone, press the
hands-free button or Softkey [
End
] key to close the voice channel and end the call.
Note! When the phone is in the reserved state, the user must press the [Resume]
key to return to the call state, or put the receiver back and press the hands-free
hook to end the call.
9.4 Redial
Redial the last outgoing number:
When the phone is in standby mode, press the redial button and the phone will call
out the last number dialed.
Call out any number with the redial key:
Enter the number, press the redial key, and the phone will call out the number on the
dial.
Press the redial key to enter the call record:
Log in the phone page, enter [
Phone Settings
] >> [
Features
] >> [
Redial Settings
],
check redial to enter the call record, press the redial button when standby to enter
the call record page, and press again to call out the currently located number.
