24
9 Basic Function
9.1 Making Phone Calls
Default Line
The device provides twenty line services. If both lines are configured, user can make or
receive phone calls on either line. If default line is configured by user, there will be a
default line to be used for making outgoing call which is indicated on the top left corner.
To change the default line, user can press left/right navigator buttons to switch between
two lines. Enable or disable default line, user can press [
Menu
] >> [
Features
] >>
[
General
] >> [
Default Line
] or configure from Web Interface (Web / PHONE / Features /
Basic Settings).
Picture 13 - Default line
Dialing Methods
User can dial a number by,
Entering the number directly
Selecting a phone number from phonebook contacts (Refer to
contacts
)
Selecting a phone number from cloud phonebook contacts (Refer to
Cloud Phone Book
)
Selecting a phone number from call logs (Refer to
)
Redialing the last dialed number
Dialing Number then Opening Audio
To make a phone call, user can firstly dial a number by one of the above methods. When
the dialed number is completed, user can press [
Dial
] button on the soft-menu, or press
hand-free button to turn on the speaker or headphone, or lift the handset to call out with
the current line, or user can press line key(Configured by DSS Keys) to call out with
