Fanvil Technology Co. Ltd
Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China
Tel: +86-755-2640-2199 Email: [email protected] [email protected] Official Web:www.fanvil.com
2.2.
Reset PA2S/PA3 via Reset key
Step1.
Refer to the connection diagram, connect PA2S/PA3 to the PoE switch with Network cable.
Step2.
For PA2S:
Press and hold the Reset key for 3 seconds, the device will restart and restore the factory settings
after indicator light blinks.
For PA3:
Press and hold the Reset key for 6 seconds, the device will restart and restore the factory settings
after indicator light blinks.
2.3.
Reset PA2S/PA3 via post mode
Step1.
Refer to the connection diagram, connect the computer and PA2S/PA3 to the same PoE switch with
Network cable.
Step2.
Power on PA2S again or PA3, when LED blinks fast, press its
volume up
button or
volume down
button once, device will go to post mode and its LED blinks slowly;
Step3.
Check the device is in post mode:
Connect the device and PC to same switch, add IP address 192.168.1.2 on the PC.
“ping 192.168.1.179” to check the device’s status:
