39
9.20 Intercom Setting >> MCAST
It is easy and convenient to use multicast function to send notice to each member of the multicast
via setting the multicast key on the device and sending multicast RTP stream to pre-configured
multicast address. By configuring monitoring multicast address on the device, monitor and play the
RTP stream which sent by the multicast address.
Name
Camera name
User name
External camera login name
Password
External camera login password
Camera type
Select camera manufacturer
IP address
Camera IP address, please use the camera matching scan tool to get the IP
address
port
Camera port number
Main Stream Url
After user submit the camera information and apply the changes, if the device
connects external camera successfully, the page will display the main stream URL
directly, or the information is blank.
Sub Stream Url
After user submit the camera information and apply the changes, if the device
connects external camera successfully, the page will display the sub stream URL
directly, or the information is blank.
If the IP camera user used is not in the list, and user select CUSTOMER as IP
camera brand, he also need input the main stream URL manually.
No SPS&PPS h.
264 streams
Compatible with cameras without SPS&PPS can display video normally
Advanced Settings
Video Direction
Sendonly: establish video call, and the SDP packet in the invite packet is
Sendonly;
Sendrecv: to create a call, the SDP package in the invite package is
Sendrecv
RTSP Over TCP
The RTSP goes over the TCP protocol
H.264 Payload
Type
Set the h. 264 Payload type. The range is between 96 and 127. The default is
117
Default Call
Stream
Optional main stream and substream
RTSP Information
Main Stream Url
Display the main stream URL address
Sub Stream Url
Display the sub stream URL address