Fanvil FH-S01, Руководство пользователя

Страница: 20 / 63

15
listening addresses.
Picture 12 - MCAST Setting
Table 4 - MCAST parameter
Parameters Description
Priority Defines the priority in the current call, with 1 being the highest
priority and 10 the lowest.
Enable Page Priority Compared with multicast and SIP priority, high priority is pluggable
and low priority is rejected.
Enable Prio Priority When enabled, the same port and channel can be connected.
Channel 24 is a priority channel, higher than 1-23; A channel of 0
indicates that the channel is not used.
Enable Emer Chan When enabled, channel 25 has the highest priority
Name Name of the server listening to multicast
Host:port Server address listening to multicast: port
Channel 0-25 (24 priority channels, 25 emergency channels)
Multicast
：

Go to web page of [ Function Key ] >> [ Function Key ], select the type to multicast, set
the multicast address, and select the codec.

Click Apply.

Set up the name, host and port of the receiving multicast on the web page of
[
Intercom Settings ] >> [ MCAST ].

Press the DSSKey of Multicast Key which you set.

Receive end will receive multicast call and play multicast automatically.