Fanvil BW320, Руководство пользователя

Страница: 22 / 53

22
z
DHCP: In this mode, you will get the information from the DHCP server automatically;
need not to input this information artificially.
z
PPPoE: In this mode, your must input your ADSL account and password.
You can also refer to 2.2. Initial Setting
to speed setting your network.
Obtain DNS server
automatically
Using the DHCP mode to get the DNS address. If disable, it will
using the DNS address in the Static mode, the default is enable.
If you use static mode, you need set it.
IP Address Input the IP address distributed to you.
Netmask Input the Netmask distributed to you.
Gateway Input the Gateway address distributed to you.
DNS Domain
Set DNS domain postfix. When the domain which you inputted
can not be parsed, phone will automatically add this domain to the
end of the domain which you inputted before and parse it again.
Primary DNS Input your primary DNS server address.
Alter DNS Input your standby DNS server address.
If you uses PPPoE mode
，
you need to make the above setting.
PPPoE Server It will be provided by ISP.
Username Input your ADSL account.
Password Input your ADSL password.
Notice:
1
）
Click “Apply” button after finishe your setting, IP Phone will save the setting
automatically and new setting will take effect.
2
）
If you modify IP address, the web will not response by the old IP address. Your need
input new IP address in the address column to logon in the phone.
3
）
If networks ID which is distributed by DHCP server is same as network ID which is used
by LAN of system, phone will use the DHCP IP to set WAN, and modify LAN’s networks
ID(for example, system will change LAN IP from 192.168.10.1 to 192.168.11.1) when
phone uses DHCP client to get IP in startup; if phone uses DHCP client to get IP in
running status and network ID is also same as LAN’s, phone will refuse to accept the IP
to configure WAN.
4.3.2.2. LAN Config